- Thank you received: 0
Amalthea - what's the story?
21 years 11 months ago #3983
by Rudolf
Reply from Rudolf Henning was created by Rudolf
A web site "the nine planets" (
www.seds.org/billa/tnp/amalthea.html#amalthea
) gives the mass and size (probably estimates). Another site "
www.solarviews.com/eng/amalthea.htm
" gives the density as 1.8.
Hope this helps.
Hope this helps.
Please Log in or Create an account to join the conversation.
21 years 11 months ago #4021
by Jeremy
Replied by Jeremy on topic Reply from
<BLOCKQUOTE id=quote><font size=2 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
...gives the density as 1.8.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>
That is the amount one finds listed but that is not the most recent value that has been determined. Thanks anyhow.
...gives the density as 1.8.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>
That is the amount one finds listed but that is not the most recent value that has been determined. Thanks anyhow.
Please Log in or Create an account to join the conversation.
21 years 11 months ago #3879
by Rudolf
Replied by Rudolf on topic Reply from Rudolf Henning
I found another page that has different data
nssdc.gsfc.nasa.gov/planetary/factsheet/joviansatfact.html
Here the Mean density is stated as 3100 kg/m^3.
Rudolf
nssdc.gsfc.nasa.gov/planetary/factsheet/joviansatfact.html
Here the Mean density is stated as 3100 kg/m^3.
Rudolf
Please Log in or Create an account to join the conversation.
21 years 11 months ago #4358
by Jeremy
Replied by Jeremy on topic Reply from
<BLOCKQUOTE id=quote><font size=2 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
...Mean density is stated as 3100 kg/m^3.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>
That is the same as 3,100,000g/1,000,000cm^3 or 3.1g/cm^3. Too high. The latest value was described as being close to water. I assume that would drop it to below 1.8g/cm^3.
...Mean density is stated as 3100 kg/m^3.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>
That is the same as 3,100,000g/1,000,000cm^3 or 3.1g/cm^3. Too high. The latest value was described as being close to water. I assume that would drop it to below 1.8g/cm^3.
Please Log in or Create an account to join the conversation.
Time to create page: 0.275 seconds